KCB Small Oil Gear Pump

Product Introduction:

Application
It applies to delivering non-corrosive lubricating-lil or equivalent liquid without solid pareiras and fib res at temperature below 80 and with the viscosity of 5×10-61.5×10-3m2/S(5-1500cSt).
Application Scope
It can give performance as transfer-pump or booster pump in oil delivery system.It can be also applied as a fuel pump for delivery system,pressurization and injection in fuel supply system and in all industry fields as lubricating pump.
Structure Features
KCB series gear pumps are mainly composed of gears,axles pump body,pump,cap safety valve and axle-end seals etc.The heat-treated gears have the advantage of higher hardness and intensity,and rotate with the axles inside the replaceable bearing sleeves.All of pump's parts can be lubricated by delivered medium when working.
The pump is properly designed with leakage and return chute,which lets the gears bear the least torque force and reduces load and wear on bearings bear the least torque force and reduces load and wear on bearings in order to raise pump's efficiency.
It is also designed with safety valve for protection against overload.The full return flow pressure of the safety valve is 1.5times higher than the rated exhaust pressure of the pump.It can be also adjusted within the allowance of exhaust pressure range according to circumstances .But please note the safety valve can't be applied as pressure-reducing valve for long time .You may install pressure-reducing valve separately on pipe-line if needed.

Main parameter:

KCB small oil gear pump

small oil gear pump

gear oil pump

KCB Small Oil Gear Pump Images